## Object properties

One of GObject's nice features is its generic get/set mechanism for object properties. When an object is instanciated, the object's class_init handler should be used to register the object's properties with `g_object_class_install_property` (implemented in `gobject.c`).

The best way to understand how object properties work is by looking at a real example on how it is used:

    /************************************************/
    /* Implementation                               */
    /************************************************/

    enum {
      MAMAN_BAR_CONSTRUCT_NAME = 1,
      MAMAN_BAR_PAPA_NUMBER,
    };

    static void
    maman_bar_instance_init (GTypeInstance   *instance,
                             gpointer         g_class)
    {
      MamanBar *self = (MamanBar *)instance;
    }

    static void
    maman_bar_set_property (GObject      *object,
                            guint         property_id,
                            const GValue *value,
                            GParamSpec   *pspec)
    {
      MamanBar *self = (MamanBar *) object;

      switch (property_id) {
      case MAMAN_BAR_CONSTRUCT_NAME: {
        g_free (self->private->name);
        self->private->name = g_value_dup_string (value);
        g_print ("maman: %s\n",self->private->name);
      }
        break;
      case MAMAN_BAR_PAPA_NUMBER: {
        self->private->papa_number = g_value_get_uchar (value);
        g_print ("papa: %u\n",self->private->papa_number);
      }
        break;
      default:
        /* We don't have any other property... */
        G_OBJECT_WARN_INVALID_PROPERTY_ID(object,property_id,pspec);
        break;
      }
    }

    static void
    maman_bar_get_property (GObject      *object,
                            guint         property_id,
                            GValue       *value,
                            GParamSpec   *pspec)
    {
      MamanBar *self = (MamanBar *) object;

      switch (property_id) {
      case MAMAN_BAR_CONSTRUCT_NAME: {
        g_value_set_string (value, self->private->name);
      }
        break;
      case MAMAN_BAR_PAPA_NUMBER: {
        g_value_set_uchar (value, self->private->papa_number);
      }
        break;
      default:
        /* We don't have any other property... */
        G_OBJECT_WARN_INVALID_PROPERTY_ID(object,property_id,pspec);
        break;
      }
    }

    static void
    maman_bar_class_init (gpointer g_class,
                          gpointer g_class_data)
    {
      GObjectClass *gobject_class = G_OBJECT_CLASS (g_class);
      MamanBarClass *klass = MAMAN_BAR_CLASS (g_class);
      GParamSpec *pspec;

      gobject_class->set_property = maman_bar_set_property;
      gobject_class->get_property = maman_bar_get_property;

      pspec = g_param_spec_string ("maman-name",
                                   "Maman construct prop",
                                   "Set maman's name",
                                   "no-name-set" /* default value */,
                                   G_PARAM_CONSTRUCT_ONLY | G_PARAM_READWRITE);
      g_object_class_install_property (gobject_class,
                                       MAMAN_BAR_CONSTRUCT_NAME,
                                       pspec);

      pspec = g_param_spec_uchar ("papa-number",
                                  "Number of current Papa",
                                  "Set/Get papa's number",
                                  0  /* minimum value */,
                                  10 /* maximum value */,
                                  2  /* default value */,
                                  G_PARAM_READWRITE);
      g_object_class_install_property (gobject_class,
                                       MAMAN_BAR_PAPA_NUMBER,
                                       pspec);
    }

    /************************************************/
    /* Use                                          */
    /************************************************/

    GObject *bar;
    GValue val = {0,};
    bar = g_object_new (MAMAN_TYPE_SUBBAR, NULL);
    g_value_init (&val, G_TYPE_CHAR);
    g_value_set_char (&val, 11);
    g_object_set_property (G_OBJECT (bar), "papa-number", &val);

The client code just above looks simple but a lot of things happen under the hood:

`g_object_set_property` first ensures a property with this name was registered in bar's class_init handler. If so, it calls `object_set_property` which first walks the class hierarchy, from bottom, most derived type, to top, fundamental type to find the class which registered that property. It then tries to convert the user-provided GValue into a GValue whose type if that of the associated property.

If the user provides a signed char GValue, as is shown here, and if the object's property was registered as an unsigned int, `g_value_transform` will try to transform the input signed char into an unsigned int. Of course, the success of the transformation depends on the availability of the required transform function. In practice, there will almost always be a transformation [5] which matches and conversion will be caried out if needed.

After transformation, the GValue is validated by `g_param_value_validate` which makes sure the user's data stored in the GValue matches the characteristics specified by the property's GParamSpec. Here, the GParamSpec we provided in class_init has a validation function which makes sure that the GValue contains a value which respects the minimum and maximum bounds of the GParamSpec. In the example above, the client's GValue does not respect these constraints (it is set to 11, while the maximum is 10). As such, the `g_object_set_property` function will return with an error.

If the user's GValue had been set to a valid value, `g_object_set_property` would have proceeded with calling the object's set_property class method. Here, since our implementation of Foo did override this method, the code path would jump to `foo_set_property` after having retrieved from the GParamSpec the param_id [6] which had been stored by `g_object_class_install_property`.

Once the property has been set by the object's set_property class method, the code path returns to `g_object_set_property` which calls `g_object_notify_queue_thaw`. This function makes sure that the "notify" signal is emitted on the object's instance with the changed property as parameter unless notifications were frozen by `g_object_freeze_notify`.

`g_object_thaw_notify` can be used to re-enable notification of property modifications through the "notify" signal. It is important to remember that even if properties are changed while property change notification is frozen, the "notify" signal will be emitted once for each of these changed properties as soon as the property change notification is thawn: no property change is lost for the "notify" signal. Signal can only be delayed by the notification freezing mechanism.

### Accessing multiple properties at once

It is interesting to note that the `g_object_set` and `g_object_set_valist` (vararg version) functions can be used to set multiple properties at once. The client code shown above can then be re-written as:

    MamanBar *foo;
    foo = /* */;
    g_object_set (G_OBJECT (foo),
                  "papa-number", 2,
                  "maman-name", "test",
                  NULL);

The code above will trigger one notify signal emission for each property modified.

Of course, the _get versions are also available: `g_object_get` and `g_object_get_valist` (vararg version) can be used to get numerous properties at once.

Really attentive readers now understand how `g_object_new`, `g_object_newv` and `g_object_new_valist` work: they parse the user-provided variable number of parameters and invoke `g_object_set` on each pair of parameters only after the object has been successfully constructed. Of course, the "notify" signal will be emitted for each property set.

[5] Its behaviour might not be what you expect but it is up to you to actually avoid relying on these transformations.

[6] It should be noted that the param_id used here need only to uniquely identify each GParamSpec within the FooClass such that the switch used in the set and get methods actually works. Of course, this locally-unique integer is purely an optimization: it would have been possible to use a set of if (strcmp (a, b) == 0) {} else if (strcmp (a, b) == 0) {} statements.