msgid ""
msgstr ""
"Project-Id-Version: kdeorg\n"
"PO-Revision-Date: 2023-12-30 13:42\n"
"Language-Team: Chinese Simplified\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Qt-Contexts: true\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Crowdin-Project: kdeorg\n"
"X-Crowdin-Project-ID: 269464\n"
"X-Crowdin-Language: zh-CN\n"
"X-Crowdin-File: /kf5-trunk/messages/karchive/karchive5_qt.pot\n"
"X-Crowdin-File-ID: 41108\n"

#: k7zip.cpp:2319
msgctxt "K7Zip|"
msgid "Could not get underlying device"
msgstr "无法获取底层设备"

#: k7zip.cpp:2327
msgctxt "K7Zip|"
msgid "Read header failed"
msgstr "读取文件头失败"

#: k7zip.cpp:2333
msgctxt "K7Zip|"
msgid "Check signature failed"
msgstr "检查签名失败"

#: k7zip.cpp:2356
msgctxt "K7Zip|"
msgid "Bad CRC"
msgstr "CRC 错误"

#: k7zip.cpp:2365
msgctxt "K7Zip|"
msgid "Next header size is too big"
msgstr "下一个文件头太大"

#: k7zip.cpp:2370
msgctxt "K7Zip|"
msgid "Next header size is less than zero"
msgstr "下一个文件头小于 0"

#: k7zip.cpp:2381
#, qt-format
msgctxt "K7Zip|"
msgid "Failed read next header size; should read %1, read %2"
msgstr "读取下一文件头大小失败；应读取 %1，读取 %2"

#: k7zip.cpp:2393
msgctxt "K7Zip|"
msgid "Bad next header CRC"
msgstr "下一个文件头 CRC 错误"

#: k7zip.cpp:2401
msgctxt "K7Zip|"
msgid "Error in header"
msgstr "文件头错误"

#: k7zip.cpp:2420
msgctxt "K7Zip|"
msgid "Wrong header type"
msgstr "错误的文件头类型"

#: k7zip.cpp:2430 k7zip.cpp:2436
msgctxt "K7Zip|"
msgid "Not implemented"
msgstr "尚未实现"

#: k7zip.cpp:2442
msgctxt "K7Zip|"
msgid "Error while reading main streams information"
msgstr "读取主信息流时出错"

#: k7zip.cpp:2460
msgctxt "K7Zip|"
msgid "Error while reading header"
msgstr "读取文件头时出错"

#: k7zip.cpp:2520
msgctxt "K7Zip|"
msgid "Error reading modification time"
msgstr "读取修改时间错误"

#: k7zip.cpp:2566
msgctxt "K7Zip|"
msgid "Error reading MTime"
msgstr "读取 MTime 出错"

#: k7zip.cpp:2573
msgctxt "K7Zip|"
msgid "Invalid"
msgstr "无效"

#: k7zip.cpp:2595
#, qt-format
msgctxt "K7Zip|"
msgid "Read size failed (checkRecordsSize: %1, d->pos - ppp: %2, size: %3)"
msgstr "读取大小失败 (checkRecordsize：%1，d->pos - ppp：%2，size：%3)"

#: k7zip.cpp:2796
msgctxt "K7Zip|"
msgid "Write error"
msgstr "写入错误"

#: k7zip.cpp:2826
msgctxt "K7Zip|"
msgid "Failed while encoding header"
msgstr "编码文件头失败"

#: k7zip.cpp:2870
msgctxt "K7Zip|"
msgid "No file currently selected"
msgstr "当前没有选择文件"

#: k7zip.cpp:2894 k7zip.cpp:2944 k7zip.cpp:2986
msgctxt "K7Zip|"
msgid "Application error: 7-Zip file must be open before being written into"
msgstr "应用程序错误：7-Zip 文件必须先打开才能写入"

#: k7zip.cpp:2900 k7zip.cpp:2992
msgctxt "K7Zip|"
msgid "Application error: attempted to write into non-writable 7-Zip file"
msgstr "应用程序错误：尝试写入不可写入的 7-Zip 文件"

#: kar.cpp:56 kar.cpp:63 kar.cpp:70 kar.cpp:77
msgctxt "KAr|"
msgid "Cannot write to AR file"
msgstr "无法写入 AR 文件"

#: kar.cpp:90
#, qt-format
msgctxt "KAr|"
msgid "Unsupported mode %1"
msgstr "不支持的模式 %1"

#: kar.cpp:101
msgctxt "KAr|"
msgid "Invalid main magic"
msgstr "无效的主 magic 参数"

#: kar.cpp:118
msgctxt "KAr|"
msgid "Invalid magic"
msgstr "无效 magic 参数"

#: kar.cpp:129
msgctxt "KAr|"
msgid "Invalid size"
msgstr "无效的大小"

#: kar.cpp:149
msgctxt "KAr|"
msgid "Invalid longfilename reference"
msgstr "无效的长文件名引用"

#: kar.cpp:153
msgctxt "KAr|"
msgid "Invalid longfilename position reference"
msgstr "无效的长文件名位置引用"

#: karchive.cpp:157
msgctxt "KArchive|"
msgid "No filename or device was specified"
msgstr "未指定文件名或设备"

#: karchive.cpp:162
#, qt-format
msgctxt "KArchive|"
msgid "Could not open device in mode %1"
msgstr "无法在模式 %1 中打开设备"

#: karchive.cpp:189
#, qt-format
msgctxt "KArchive|"
msgid "QSaveFile creation for %1 failed: %2"
msgstr "QSaveFile 在创建文件：%1 时失败：%2"

#: karchive.cpp:208
#, qt-format
msgctxt "KArchive|"
msgid "Unsupported mode %1"
msgstr "不支持的模式 %1"

#: karchive.cpp:217
msgctxt "KArchive|"
msgid "Archive already closed"
msgstr "压缩文件已关闭"

#: karchive.cpp:268
#, qt-format
msgctxt "KArchive|"
msgid "%1 doesn't exist or is not a regular file."
msgstr "%1 不存在，或者不是一个普通文件。"

#: karchive.cpp:274
#, qt-format
msgctxt "KArchive|"
msgid ""
"Failed accessing the file %1 for adding to the archive. The error was: %2"
msgstr "无法访问文件 %1 以添加到压缩文件中。错误：%2"

#: karchive.cpp:320
#, qt-format
msgctxt "KArchive|"
msgid "Couldn't open file %1: %2"
msgstr "无法打开文件 %1：%2"

#: karchive.cpp:354
#, qt-format
msgctxt "KArchive|"
msgid "Directory %1 does not exist"
msgstr "目录 %1 不存在"

#: karchive.cpp:418
#, qt-format
msgctxt "KArchive|"
msgid "Writing failed: %1"
msgstr "写入失败：%1"

#: karchive_p.h:56
msgctxt "KArchivePrivate|"
msgid "Unknown error"
msgstr "未知的错误"

#: kcompressiondevice.cpp:485
msgctxt "KCompressionDevice|"
msgid "Could not write. Partition full?"
msgstr "无法写入。请检查分区是否已满。"

#: krcc.cpp:83 krcc.cpp:90 krcc.cpp:97 krcc.cpp:104
msgctxt "KRcc|"
msgid "Cannot write to RCC file"
msgstr "无法写入 RCC 文件"

#: krcc.cpp:117
#, qt-format
msgctxt "KRcc|"
msgid "Unsupported mode %1"
msgstr "不支持的模式 %1"

#: krcc.cpp:124
#, qt-format
msgctxt "KRcc|"
msgid "Failed to register resource %1 under prefix %2"
msgstr "在前缀 %2 下注册资源 %1 失败"

#: ktar.cpp:344
#, qt-format
msgctxt "KTar|"
msgid "File %1 does not exist"
msgstr "文件 %1 不存在"

#: ktar.cpp:351
#, qt-format
msgctxt "KTar|"
msgid "Archive %1 is corrupt"
msgstr "压缩文件 %1 已损坏"

#: ktar.cpp:355
msgctxt "KTar|"
msgid "Disk full"
msgstr "磁盘已满"

#: ktar.cpp:389
msgctxt "KTar|"
msgid "Could not get underlying device"
msgstr "无法获取底层设备"

#: ktar.cpp:404
msgctxt "KTar|"
msgid "Could not read tar header"
msgstr "无法读取 tar 文件头部信息。"

#: ktar.cpp:582
#, qt-format
msgctxt "KTar|"
msgid "Failed to write back temp file: %1"
msgstr "写入临时文件：%1 失败"

#: ktar.cpp:638
#, qt-format
msgctxt "KTar|"
msgid "Couldn't write alignment: %1"
msgstr "写入对齐信息：%1 失败"

#: ktar.cpp:761 ktar.cpp:844 ktar.cpp:913
msgctxt "KTar|"
msgid "Application error: TAR file must be open before being written into"
msgstr "应用程序错误：TAR 文件必须先打开才能写入"

#: ktar.cpp:767
msgctxt "KTar|"
msgid "Application error: attempted to write into non-writable 7-Zip file"
msgstr "应用程序错误：尝试写入不可写入的 7-Zip 文件"

#: ktar.cpp:774
#, qt-format
msgctxt "KTar|"
msgid "Application limitation: Can not add file larger than %1 bytes"
msgstr "应用程序限制：不能添加大于 %1 字节的文件"

#: ktar.cpp:828
#, qt-format
msgctxt "KTar|"
msgid "Failed to write header: %1"
msgstr "无法写入文件头：%1"

#: ktar.cpp:850 ktar.cpp:919
msgctxt "KTar|"
msgid "Application error: attempted to write into non-writable TAR file"
msgstr "应用程序错误：尝试写入不可写入的 TAR 文件"

#: kzip.cpp:463 kzip.cpp:482
#, qt-format
msgctxt "KZip|"
msgid "Invalid ZIP file. Unexpected end of file. (Error code: %1)"
msgstr "无效的 ZIP 文件。意外的文件结尾。（错误代码：%1 ）"

#: kzip.cpp:506
msgctxt "KZip|"
msgid "Invalid ZIP file. Negative name length"
msgstr "无效的 ZIP 文件。名称长度为负值。"

#: kzip.cpp:511
msgctxt "KZip|"
msgid "Invalid ZIP file. Name not completely read (#2)"
msgstr "无效的 ZIP 文件。名称无法完全读取 (#2)"

#: kzip.cpp:530
msgctxt "KZip|"
msgid "Invalid ZIP File. Broken ExtraField."
msgstr "无效的 ZIP 文件。损坏的 ExtraField。"

#: kzip.cpp:544 kzip.cpp:567
msgctxt "KZip|"
msgid "Could not seek to next header token"
msgstr "无法定位到下一个头标记"

#: kzip.cpp:559
msgctxt "KZip|"
msgid "Invalid ZIP file. Unexpected end of file. (#5)"
msgstr "无效的 ZIP 文件。意外的文件结尾。(#5)"

#: kzip.cpp:575
msgctxt "KZip|"
msgid "Could not seek to file compressed size"
msgstr "无法定位文件压缩后大小信息"

#: kzip.cpp:591
msgctxt "KZip|"
msgid "Invalid ZIP file. Unexpected end of file. (#1)"
msgstr "无效的 ZIP 文件。意外的文件结尾。(#1)"

#: kzip.cpp:624
msgctxt "KZip|"
msgid ""
"Invalid ZIP file, central entry too short (not long enough for valid entry)"
msgstr "无效的 ZIP 文件，中心条目太短 (短于有效条目的长度要求)"

#: kzip.cpp:633
msgctxt "KZip|"
msgid "Invalid ZIP file, file path name length smaller or equal to zero"
msgstr "无效的 ZIP 文件，文件路径名称长度小于或等于 0"

#: kzip.cpp:715
msgctxt "KZip|"
msgid "Invalid ZIP file, found empty entry name"
msgstr "无效的 ZIP 文件，发现空条目名称"

#: kzip.cpp:756
#, qt-format
msgctxt "KZip|"
msgid "File %1 is in folder %2, but %3 is actually a file."
msgstr "文件 %1 位于文件夹 %2 之中，但 %3 实际上是一个文件。"

#: kzip.cpp:767
msgctxt "KZip|"
msgid "Could not seek to next entry"
msgstr "无法定位到下一个条目"

#: kzip.cpp:780 kzip.cpp:790
msgctxt "KZip|"
msgid "Invalid ZIP file. Unexpected end of file."
msgstr "无效的 ZIP 文件。意外的文件结尾。"

#: kzip.cpp:813
#, qt-format
msgctxt "KZip|"
msgid "Invalid ZIP file. Unrecognized header at offset %1"
msgstr "无效的 ZIP 文件。无法识别的文件头偏移量 %1"

#: kzip.cpp:844
#, qt-format
msgctxt "KZip|"
msgid "Could not seek to next file header: %1"
msgstr "无法定位到下一个头标记：%1"

#: kzip.cpp:870 kzip.cpp:966
#, qt-format
msgctxt "KZip|"
msgid "Could not write file header: %1"
msgstr "无法写入文件头：%1"

#: kzip.cpp:1013
#, qt-format
msgctxt "KZip|"
msgid "Could not write central dir record: %1"
msgstr "无法写入中央目录记录：%1"

#: kzip.cpp:1049
msgctxt "KZip|"
msgid "Application error: ZIP file must be open before being written into"
msgstr "应用程序错误：ZIP 文件必须先打开才能写入"

#: kzip.cpp:1055
msgctxt "KZip|"
msgid "Application error: attempted to write into non-writable ZIP file"
msgstr "应用程序错误：尝试写入不可写入的 ZIP 文件"

#: kzip.cpp:1061
msgctxt "KZip|"
msgid "Cannot create a device. Disk full?"
msgstr "无法创建设备。请检查磁盘是否已满。"

#: kzip.cpp:1067
msgctxt "KZip|"
msgid "Cannot seek in ZIP file. Disk full?"
msgstr "无法在 ZIP 文件中寻址。请检查磁盘是否已满。"

#: kzip.cpp:1209
msgctxt "KZip|"
msgid "Could not write to the archive. Disk full?"
msgstr "无法写入该压缩文件。请检查磁盘是否已满。"

#: kzip.cpp:1228
#, qt-format
msgctxt "KZip|"
msgid "Could not open compression device: %1"
msgstr "无法打开压缩设备：%1"

#: kzip.cpp:1315
msgctxt "KZip|"
msgid "No file or device"
msgstr "没有文件或者设备"

#: kzip.cpp:1328
#, qt-format
msgctxt "KZip|"
msgid "Error writing data: %1"
msgstr "写入数据时出错：%1"
